Merge tag 'drm-intel-fixes-2022-09-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Revert a display patch around max DP source rate now
  that the proper WaEdpLinkRateDataReload is in place. (Ville)
- Fix perf limit reasons bit position. (Ashutosh)
- Fix unclaimmed mmio registers on suspend flow with GuC. (Umesh)
- A vma_move_to_active fix for a regression with video decoding. (Nirmoy)
- DP DSP fix. (Ankit)

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YyMtmGMXRLsURoM5@intel.com

Author: airlied

drivers/gpu/drm/i915/display/icl_dsi.c

@@ -1629,6 +1629,8 @@ static int gen11_dsi_dsc_compute_config(struct intel_encoder *encoder,
 	/* FIXME: initialize from VBT */
 	vdsc_cfg->rc_model_size = DSC_RC_MODEL_SIZE_CONST;
 
+	vdsc_cfg->pic_height = crtc_state->hw.adjusted_mode.crtc_vdisplay;
+
 	ret = intel_dsc_compute_params(crtc_state);
 	if (ret)
 		return ret;

drivers/gpu/drm/i915/display/intel_dp.c

@@ -389,47 +389,21 @@ static int dg2_max_source_rate(struct intel_dp *intel_dp)
 	return intel_dp_is_edp(intel_dp) ? 810000 : 1350000;
 }
 
-static bool is_low_voltage_sku(struct drm_i915_private *i915, enum phy phy)
-{
-	u32 voltage;
-
-	voltage = intel_de_read(i915, ICL_PORT_COMP_DW3(phy)) & VOLTAGE_INFO_MASK;
-
-	return voltage == VOLTAGE_INFO_0_85V;
-}
-
 static int icl_max_source_rate(struct intel_dp *intel_dp)
 {
 	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
 	struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
 	enum phy phy = intel_port_to_phy(dev_priv, dig_port->base.port);
 
-	if (intel_phy_is_combo(dev_priv, phy) &&
-	    (is_low_voltage_sku(dev_priv, phy) || !intel_dp_is_edp(intel_dp)))
+	if (intel_phy_is_combo(dev_priv, phy) && !intel_dp_is_edp(intel_dp))
 		return 540000;
 
 	return 810000;
 }
 
 static int ehl_max_source_rate(struct intel_dp *intel_dp)
 {
-	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
-	struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
-	enum phy phy = intel_port_to_phy(dev_priv, dig_port->base.port);
-
-	if (intel_dp_is_edp(intel_dp) || is_low_voltage_sku(dev_priv, phy))
-		return 540000;
-
-	return 810000;
-}
-
-static int dg1_max_source_rate(struct intel_dp *intel_dp)
-{
-	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
-	struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
-	enum phy phy = intel_port_to_phy(i915, dig_port->base.port);
-
-	if (intel_phy_is_combo(i915, phy) && is_low_voltage_sku(i915, phy))
+	if (intel_dp_is_edp(intel_dp))
 		return 540000;
 
 	return 810000;
@@ -491,7 +465,7 @@ intel_dp_set_source_rates(struct intel_dp *intel_dp)
 			max_rate = dg2_max_source_rate(intel_dp);
 		else if (IS_ALDERLAKE_P(dev_priv) || IS_ALDERLAKE_S(dev_priv) ||
 			 IS_DG1(dev_priv) || IS_ROCKETLAKE(dev_priv))
-			max_rate = dg1_max_source_rate(intel_dp);
+			max_rate = 810000;
 		else if (IS_JSL_EHL(dev_priv))
 			max_rate = ehl_max_source_rate(intel_dp);
 		else
@@ -1395,6 +1369,7 @@ static int intel_dp_dsc_compute_params(struct intel_encoder *encoder,
 	 * DP_DSC_RC_BUF_SIZE for this.
 	 */
 	vdsc_cfg->rc_model_size = DSC_RC_MODEL_SIZE_CONST;
+	vdsc_cfg->pic_height = crtc_state->hw.adjusted_mode.crtc_vdisplay;
 
 	/*
 	 * Slice Height of 8 works for all currently available panels. So start

drivers/gpu/drm/i915/display/intel_vdsc.c

@@ -460,7 +460,6 @@ int intel_dsc_compute_params(struct intel_crtc_state *pipe_config)
 	u8 i = 0;
 
 	vdsc_cfg->pic_width = pipe_config->hw.adjusted_mode.crtc_hdisplay;
-	vdsc_cfg->pic_height = pipe_config->hw.adjusted_mode.crtc_vdisplay;
 	vdsc_cfg->slice_width = DIV_ROUND_UP(vdsc_cfg->pic_width,
 					     pipe_config->dsc.slice_count);
 

drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c

@@ -1438,7 +1438,12 @@ void intel_guc_busyness_park(struct intel_gt *gt)
 	if (!guc_submission_initialized(guc))
 		return;
 
-	cancel_delayed_work(&guc->timestamp.work);
+	/*
+	 * There is a race with suspend flow where the worker runs after suspend
+	 * and causes an unclaimed register access warning. Cancel the worker
+	 * synchronously here.
+	 */
+	cancel_delayed_work_sync(&guc->timestamp.work);
 
 	/*
 	 * Before parking, we should sample engine busyness stats if we need to.

drivers/gpu/drm/i915/i915_reg.h

@@ -1857,14 +1857,14 @@
 
 #define GT0_PERF_LIMIT_REASONS		_MMIO(0x1381a8)
 #define   GT0_PERF_LIMIT_REASONS_MASK	0xde3
-#define   PROCHOT_MASK			REG_BIT(1)
-#define   THERMAL_LIMIT_MASK		REG_BIT(2)
-#define   RATL_MASK			REG_BIT(6)
-#define   VR_THERMALERT_MASK		REG_BIT(7)
-#define   VR_TDC_MASK			REG_BIT(8)
-#define   POWER_LIMIT_4_MASK		REG_BIT(9)
-#define   POWER_LIMIT_1_MASK		REG_BIT(11)
-#define   POWER_LIMIT_2_MASK		REG_BIT(12)
+#define   PROCHOT_MASK			REG_BIT(0)
+#define   THERMAL_LIMIT_MASK		REG_BIT(1)
+#define   RATL_MASK			REG_BIT(5)
+#define   VR_THERMALERT_MASK		REG_BIT(6)
+#define   VR_TDC_MASK			REG_BIT(7)
+#define   POWER_LIMIT_4_MASK		REG_BIT(8)
+#define   POWER_LIMIT_1_MASK		REG_BIT(10)
+#define   POWER_LIMIT_2_MASK		REG_BIT(11)
 
 #define CHV_CLK_CTL1			_MMIO(0x101100)
 #define VLV_CLK_CTL2			_MMIO(0x101104)

drivers/gpu/drm/i915/i915_vma.c

@@ -1882,12 +1882,13 @@ int _i915_vma_move_to_active(struct i915_vma *vma,
 		enum dma_resv_usage usage;
 		int idx;
 
-		obj->read_domains = 0;
 		if (flags & EXEC_OBJECT_WRITE) {
 			usage = DMA_RESV_USAGE_WRITE;
 			obj->write_domain = I915_GEM_DOMAIN_RENDER;
+			obj->read_domains = 0;
 		} else {
 			usage = DMA_RESV_USAGE_READ;
+			obj->write_domain = 0;
 		}
 
 		dma_fence_array_for_each(curr, idx, fence)