Merge tag 'ata-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux

Pull ata updates from Niklas Cassel:

 - Fix typos in comments (Yan Zhen)

 - Remove unused macro definitions (Damien Le Moal)

 - Switch back to the .remove() callback (Uwe Kleine-König)

 - Make use of the get_unaligned_be24() helper instead of open coding
   (Andy Shevchenko)

 - Refactor and cleanup ata_scsi_simulate() command emulation, such that
   all commands use ata_scsi_rbuf_fill() with its own callback (Damien
   Le Moal)

 - Improve ata_scsi_simulate() command emulation by accurately setting
   the SCSI command residual (number of bytes not filled) in the command
   reply (Damien Le Moal)

 - Add missing iommus property in ahci-platform device tree binding
   (Frank Wunderlich)

* tag 'ata-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  dt-bindings: ata: ahci-platform: add missing iommus property
  ata: libata-scsi: Return residual for emulated SCSI commands
  ata: libata-scsi: Remove struct ata_scsi_args
  ata: libata-scsi: Document all VPD page inquiry actors
  ata: libata-scsi: Refactor ata_scsiop_maint_in()
  ata: libata-scsi: Refactor ata_scsiop_read_cap()
  ata: libata-scsi: Refactor ata_scsi_simulate()
  ata: libata-scsi: Refactor scsi_6_lba_len() with use of get_unaligned_be24()
  ata: Switch back to struct platform_driver::remove()
  ata: libata: Remove unused macro definitions
  ata: Fix typos in the comment

Author: torvalds

Documentation/devicetree/bindings/ata/ahci-platform.yaml

@@ -84,6 +84,9 @@ properties:
     minItems: 1
     maxItems: 3
 
+  iommus:
+    maxItems: 1
+
 patternProperties:
   "^sata-port@[0-9a-f]+$":
     $ref: /schemas/ata/ahci-common.yaml#/$defs/ahci-port

drivers/ata/ahci.c

@@ -1676,7 +1676,7 @@ static int ahci_init_msi(struct pci_dev *pdev, unsigned int n_ports,
 	/*
 	 * If number of MSIs is less than number of ports then Sharing Last
 	 * Message mode could be enforced. In this case assume that advantage
-	 * of multipe MSIs is negated and use single MSI mode instead.
+	 * of multiple MSIs is negated and use single MSI mode instead.
 	 */
 	if (n_ports > 1) {
 		nvec = pci_alloc_irq_vectors(pdev, n_ports, INT_MAX,

drivers/ata/ahci_brcm.c

@@ -571,7 +571,7 @@ static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);
 
 static struct platform_driver brcm_ahci_driver = {
 	.probe = brcm_ahci_probe,
-	.remove_new = brcm_ahci_remove,
+	.remove = brcm_ahci_remove,
 	.shutdown = brcm_ahci_shutdown,
 	.driver = {
 		.name = DRV_NAME,

drivers/ata/ahci_ceva.c

@@ -402,7 +402,7 @@ MODULE_DEVICE_TABLE(of, ceva_ahci_of_match);
 
 static struct platform_driver ceva_ahci_driver = {
 	.probe = ceva_ahci_probe,
-	.remove_new = ata_platform_remove_one,
+	.remove = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = ceva_ahci_of_match,

drivers/ata/ahci_da850.c

@@ -238,7 +238,7 @@ MODULE_DEVICE_TABLE(of, ahci_da850_of_match);
 
 static struct platform_driver ahci_da850_driver = {
 	.probe = ahci_da850_probe,
-	.remove_new = ata_platform_remove_one,
+	.remove = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = ahci_da850_of_match,

drivers/ata/ahci_dm816.c

@@ -182,7 +182,7 @@ MODULE_DEVICE_TABLE(of, ahci_dm816_of_match);
 
 static struct platform_driver ahci_dm816_driver = {
 	.probe = ahci_dm816_probe,
-	.remove_new = ata_platform_remove_one,
+	.remove = ata_platform_remove_one,
 	.driver = {
 		.name = AHCI_DM816_DRV_NAME,
 		.of_match_table = ahci_dm816_of_match,

drivers/ata/ahci_dwc.c

@@ -478,7 +478,7 @@ MODULE_DEVICE_TABLE(of, ahci_dwc_of_match);
 
 static struct platform_driver ahci_dwc_driver = {
 	.probe = ahci_dwc_probe,
-	.remove_new = ata_platform_remove_one,
+	.remove = ata_platform_remove_one,
 	.shutdown = ahci_platform_shutdown,
 	.driver = {
 		.name = DRV_NAME,

drivers/ata/ahci_imx.c

@@ -511,7 +511,7 @@ static int imx_sata_enable(struct ahci_host_priv *hpriv)
 
 	if (imxpriv->type == AHCI_IMX6Q || imxpriv->type == AHCI_IMX6QP) {
 		/*
-		 * set PHY Paremeters, two steps to configure the GPR13,
+		 * set PHY Parameters, two steps to configure the GPR13,
 		 * one write for rest of parameters, mask of first write
 		 * is 0x07ffffff, and the other one write for setting
 		 * the mpll_clk_en.
@@ -1027,7 +1027,7 @@ static SIMPLE_DEV_PM_OPS(ahci_imx_pm_ops, imx_ahci_suspend, imx_ahci_resume);
 
 static struct platform_driver imx_ahci_driver = {
 	.probe = imx_ahci_probe,
-	.remove_new = ata_platform_remove_one,
+	.remove = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = imx_ahci_of_match,

drivers/ata/ahci_mtk.c

@@ -174,7 +174,7 @@ MODULE_DEVICE_TABLE(of, ahci_of_match);
 
 static struct platform_driver mtk_ahci_driver = {
 	.probe = mtk_ahci_probe,
-	.remove_new = ata_platform_remove_one,
+	.remove = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = ahci_of_match,

drivers/ata/ahci_mvebu.c

@@ -245,7 +245,7 @@ MODULE_DEVICE_TABLE(of, ahci_mvebu_of_match);
 
 static struct platform_driver ahci_mvebu_driver = {
 	.probe = ahci_mvebu_probe,
-	.remove_new = ata_platform_remove_one,
+	.remove = ata_platform_remove_one,
 	.suspend = ahci_mvebu_suspend,
 	.resume = ahci_mvebu_resume,
 	.driver = {