Merge tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux

Pull block updates from Jens Axboe:

 - NVMe updates via Keith:
      - Use uring_cmd helper (Pavel)
      - Host Memory Buffer allocation enhancements (Christoph)
      - Target persistent reservation support (Guixin)
      - Persistent reservation tracing (Guixen)
      - NVMe 2.1 specification support (Keith)
      - Rotational Meta Support (Matias, Wang, Keith)
      - Volatile cache detection enhancment (Guixen)

 - MD updates via Song:
      - Maintainers update
      - raid5 sync IO fix
      - Enhance handling of faulty and blocked devices
      - raid5-ppl atomic improvement
      - md-bitmap fix

 - Support for manually defining embedded partition tables

 - Zone append fixes and cleanups

 - Stop sending the queued requests in the plug list to the driver
   ->queue_rqs() handle in reverse order.

 - Zoned write plug cleanups

 - Cleanups disk stats tracking and add support for disk stats for
   passthrough IO

 - Add preparatory support for file system atomic writes

 - Add lockdep support for queue freezing. Already found a bunch of
   issues, and some fixes for that are in here. More will be coming.

 - Fix race between queue stopping/quiescing and IO queueing

 - ublk recovery improvements

 - Fix ublk mmap for 64k pages

 - Various fixes and cleanups

* tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux: (118 commits)
  MAINTAINERS: Update git tree for mdraid subsystem
  block: make struct rq_list available for !CONFIG_BLOCK
  block/genhd: use seq_put_decimal_ull for diskstats decimal values
  block: don't reorder requests in blk_mq_add_to_batch
  block: don't reorder requests in blk_add_rq_to_plug
  block: add a rq_list type
  block: remove rq_list_move
  virtio_blk: reverse request order in virtio_queue_rqs
  nvme-pci: reverse request order in nvme_queue_rqs
  btrfs: validate queue limits
  block: export blk_validate_limits
  nvmet: add tracing of reservation commands
  nvme: parse reservation commands's action and rtype to string
  nvmet: report ns's vwc not present
  md/raid5: Increase r5conf.cache_name size
  block: remove the ioprio field from struct request
  block: remove the write_hint field from struct request
  nvme: check ns's volatile write cache not present
  nvme: add rotational support
  nvme: use command set independent id ns if available
  ...

Author: torvalds

Documentation/ABI/stable/sysfs-block

@@ -424,6 +424,13 @@ Description:
 		[RW] This file is used to control (on/off) the iostats
 		accounting of the disk.
 
+What:		/sys/block/<disk>/queue/iostats_passthrough
+Date:		October 2024
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] This file is used to control (on/off) the iostats
+		accounting of the disk for passthrough commands.
+
 
 What:		/sys/block/<disk>/queue/logical_block_size
 Date:		May 2009

Documentation/block/cmdline-partition.rst

@@ -39,13 +39,16 @@ blkdevparts=<blkdev-def>[;<blkdev-def>]
     create a link to block device partition with the name "PARTNAME".
     User space application can access partition by partition name.
 
+ro
+    read-only. Flag the partition as read-only.
+
 Example:
 
     eMMC disk names are "mmcblk0" and "mmcblk0boot0".
 
   bootargs::
 
-    'blkdevparts=mmcblk0:1G(data0),1G(data1),-;mmcblk0boot0:1m(boot),-(kernel)'
+    'blkdevparts=mmcblk0:1G(data0),1G(data1),-;mmcblk0boot0:1m(boot)ro,-(kernel)'
 
   dmesg::
 

Documentation/block/ublk.rst

@@ -199,24 +199,36 @@ managing and controlling ublk devices with help of several control commands:
 
 - user recovery feature description
 
-  Two new features are added for user recovery: ``UBLK_F_USER_RECOVERY`` and
-  ``UBLK_F_USER_RECOVERY_REISSUE``.
-
-  With ``UBLK_F_USER_RECOVERY`` set, after one ubq_daemon(ublk server's io
+  Three new features are added for user recovery: ``UBLK_F_USER_RECOVERY``,
+  ``UBLK_F_USER_RECOVERY_REISSUE``, and ``UBLK_F_USER_RECOVERY_FAIL_IO``. To
+  enable recovery of ublk devices after the ublk server exits, the ublk server
+  should specify the ``UBLK_F_USER_RECOVERY`` flag when creating the device. The
+  ublk server may additionally specify at most one of
+  ``UBLK_F_USER_RECOVERY_REISSUE`` and ``UBLK_F_USER_RECOVERY_FAIL_IO`` to
+  modify how I/O is handled while the ublk server is dying/dead (this is called
+  the ``nosrv`` case in the driver code).
+
+  With just ``UBLK_F_USER_RECOVERY`` set, after one ubq_daemon(ublk server's io
   handler) is dying, ublk does not delete ``/dev/ublkb*`` during the whole
   recovery stage and ublk device ID is kept. It is ublk server's
   responsibility to recover the device context by its own knowledge.
   Requests which have not been issued to userspace are requeued. Requests
   which have been issued to userspace are aborted.
 
-  With ``UBLK_F_USER_RECOVERY_REISSUE`` set, after one ubq_daemon(ublk
-  server's io handler) is dying, contrary to ``UBLK_F_USER_RECOVERY``,
+  With ``UBLK_F_USER_RECOVERY_REISSUE`` additionally set, after one ubq_daemon
+  (ublk server's io handler) is dying, contrary to ``UBLK_F_USER_RECOVERY``,
   requests which have been issued to userspace are requeued and will be
   re-issued to the new process after handling ``UBLK_CMD_END_USER_RECOVERY``.
   ``UBLK_F_USER_RECOVERY_REISSUE`` is designed for backends who tolerate
   double-write since the driver may issue the same I/O request twice. It
   might be useful to a read-only FS or a VM backend.
 
+  With ``UBLK_F_USER_RECOVERY_FAIL_IO`` additionally set, after the ublk server
+  exits, requests which have issued to userspace are failed, as are any
+  subsequently issued requests. Applications continuously issuing I/O against
+  devices with this flag set will see a stream of I/O errors until a new ublk
+  server recovers the device.
+
 Unprivileged ublk device is supported by passing ``UBLK_F_UNPRIVILEGED_DEV``.
 Once the flag is set, all control commands can be sent by unprivileged
 user. Except for command of ``UBLK_CMD_ADD_DEV``, permission check on

Documentation/devicetree/bindings/mmc/mmc-card.yaml

@@ -13,6 +13,10 @@ description: |
   This documents describes the devicetree bindings for a mmc-host controller
   child node describing a mmc-card / an eMMC.
 
+  It's possible to define a fixed partition table for an eMMC for the user
+  partition, the 2 BOOT partition (boot1/2) and the 4 GP (gp1/2/3/4) if supported
+  by the eMMC.
+
 properties:
   compatible:
     const: mmc-card
@@ -26,6 +30,24 @@ properties:
       Use this to indicate that the mmc-card has a broken hpi
       implementation, and that hpi should not be used.
 
+patternProperties:
+  "^partitions(-boot[12]|-gp[14])?$":
+    $ref: /schemas/mtd/partitions/partitions.yaml
+
+    patternProperties:
+      "^partition@[0-9a-f]+$":
+        $ref: /schemas/mtd/partitions/partition.yaml
+
+        properties:
+          reg:
+            description: Must be multiple of 512 as it's converted
+              internally from bytes to SECTOR_SIZE (512 bytes)
+
+        required:
+          - reg
+
+        unevaluatedProperties: false
+
 required:
   - compatible
   - reg
@@ -42,6 +64,36 @@ examples:
             compatible = "mmc-card";
             reg = <0>;
             broken-hpi;
+
+            partitions {
+                compatible = "fixed-partitions";
+
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                partition@0 {
+                    label = "kernel"; /* Kernel */
+                    reg = <0x0 0x2000000>; /* 32 MB */
+                };
+
+                partition@2000000 {
+                    label = "rootfs";
+                    reg = <0x2000000 0x40000000>; /* 1GB */
+                };
+            };
+
+            partitions-boot1 {
+                compatible = "fixed-partitions";
+
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                partition@0 {
+                    label = "bl";
+                    reg = <0x0 0x2000000>; /* 32MB */
+                    read-only;
+                };
+            };
         };
     };
 

MAINTAINERS

@@ -21393,11 +21393,11 @@ F:	include/linux/property.h
 
 SOFTWARE RAID (Multiple Disks) SUPPORT
 M:	Song Liu <song@kernel.org>
-R:	Yu Kuai <yukuai3@huawei.com>
+M:	Yu Kuai <yukuai3@huawei.com>
 L:	linux-raid@vger.kernel.org
 S:	Supported
 Q:	https://patchwork.kernel.org/project/linux-raid/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/song/md.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux.git
 F:	drivers/md/Kconfig
 F:	drivers/md/Makefile
 F:	drivers/md/md*

block/bio-integrity.c

@@ -199,7 +199,7 @@ EXPORT_SYMBOL(bio_integrity_add_page);
 
 static int bio_integrity_copy_user(struct bio *bio, struct bio_vec *bvec,
 				   int nr_vecs, unsigned int len,
-				   unsigned int direction, u32 seed)
+				   unsigned int direction)
 {
 	bool write = direction == ITER_SOURCE;
 	struct bio_integrity_payload *bip;
@@ -247,7 +247,6 @@ static int bio_integrity_copy_user(struct bio *bio, struct bio_vec *bvec,
 	}
 
 	bip->bip_flags |= BIP_COPY_USER;
-	bip->bip_iter.bi_sector = seed;
 	bip->bip_vcnt = nr_vecs;
 	return 0;
 free_bip:
@@ -258,7 +257,7 @@ static int bio_integrity_copy_user(struct bio *bio, struct bio_vec *bvec,
 }
 
 static int bio_integrity_init_user(struct bio *bio, struct bio_vec *bvec,
-				   int nr_vecs, unsigned int len, u32 seed)
+				   int nr_vecs, unsigned int len)
 {
 	struct bio_integrity_payload *bip;
 
@@ -267,7 +266,6 @@ static int bio_integrity_init_user(struct bio *bio, struct bio_vec *bvec,
 		return PTR_ERR(bip);
 
 	memcpy(bip->bip_vec, bvec, nr_vecs * sizeof(*bvec));
-	bip->bip_iter.bi_sector = seed;
 	bip->bip_iter.bi_size = len;
 	bip->bip_vcnt = nr_vecs;
 	return 0;
@@ -303,8 +301,7 @@ static unsigned int bvec_from_pages(struct bio_vec *bvec, struct page **pages,
 	return nr_bvecs;
 }
 
-int bio_integrity_map_user(struct bio *bio, void __user *ubuf, ssize_t bytes,
-			   u32 seed)
+int bio_integrity_map_user(struct bio *bio, void __user *ubuf, ssize_t bytes)
 {
 	struct request_queue *q = bdev_get_queue(bio->bi_bdev);
 	unsigned int align = blk_lim_dma_alignment_and_pad(&q->limits);
@@ -350,9 +347,9 @@ int bio_integrity_map_user(struct bio *bio, void __user *ubuf, ssize_t bytes,
 
 	if (copy)
 		ret = bio_integrity_copy_user(bio, bvec, nr_bvecs, bytes,
-					      direction, seed);
+					      direction);
 	else
-		ret = bio_integrity_init_user(bio, bvec, nr_bvecs, bytes, seed);
+		ret = bio_integrity_init_user(bio, bvec, nr_bvecs, bytes);
 	if (ret)
 		goto release_pages;
 	if (bvec != stack_vec)

block/bio.c

@@ -1064,39 +1064,6 @@ int bio_add_pc_page(struct request_queue *q, struct bio *bio,
 }
 EXPORT_SYMBOL(bio_add_pc_page);
 
-/**
- * bio_add_zone_append_page - attempt to add page to zone-append bio
- * @bio: destination bio
- * @page: page to add
- * @len: vec entry length
- * @offset: vec entry offset
- *
- * Attempt to add a page to the bio_vec maplist of a bio that will be submitted
- * for a zone-append request. This can fail for a number of reasons, such as the
- * bio being full or the target block device is not a zoned block device or
- * other limitations of the target block device. The target block device must
- * allow bio's up to PAGE_SIZE, so it is always possible to add a single page
- * to an empty bio.
- *
- * Returns: number of bytes added to the bio, or 0 in case of a failure.
- */
-int bio_add_zone_append_page(struct bio *bio, struct page *page,
-			     unsigned int len, unsigned int offset)
-{
-	struct request_queue *q = bdev_get_queue(bio->bi_bdev);
-	bool same_page = false;
-
-	if (WARN_ON_ONCE(bio_op(bio) != REQ_OP_ZONE_APPEND))
-		return 0;
-
-	if (WARN_ON_ONCE(!bdev_is_zoned(bio->bi_bdev)))
-		return 0;
-
-	return bio_add_hw_page(q, bio, page, len, offset,
-			       queue_max_zone_append_sectors(q), &same_page);
-}
-EXPORT_SYMBOL_GPL(bio_add_zone_append_page);
-
 /**
  * __bio_add_page - add page(s) to a bio in a new segment
  * @bio: destination bio
@@ -1206,21 +1173,12 @@ EXPORT_SYMBOL_GPL(__bio_release_pages);
 
 void bio_iov_bvec_set(struct bio *bio, struct iov_iter *iter)
 {
-	size_t size = iov_iter_count(iter);
-
 	WARN_ON_ONCE(bio->bi_max_vecs);
 
-	if (bio_op(bio) == REQ_OP_ZONE_APPEND) {
-		struct request_queue *q = bdev_get_queue(bio->bi_bdev);
-		size_t max_sectors = queue_max_zone_append_sectors(q);
-
-		size = min(size, max_sectors << SECTOR_SHIFT);
-	}
-
 	bio->bi_vcnt = iter->nr_segs;
 	bio->bi_io_vec = (struct bio_vec *)iter->bvec;
 	bio->bi_iter.bi_bvec_done = iter->iov_offset;
-	bio->bi_iter.bi_size = size;
+	bio->bi_iter.bi_size = iov_iter_count(iter);
 	bio_set_flag(bio, BIO_CLONED);
 }
 
@@ -1245,20 +1203,6 @@ static int bio_iov_add_folio(struct bio *bio, struct folio *folio, size_t len,
 	return 0;
 }
 
-static int bio_iov_add_zone_append_folio(struct bio *bio, struct folio *folio,
-					 size_t len, size_t offset)
-{
-	struct request_queue *q = bdev_get_queue(bio->bi_bdev);
-	bool same_page = false;
-
-	if (bio_add_hw_folio(q, bio, folio, len, offset,
-			queue_max_zone_append_sectors(q), &same_page) != len)
-		return -EINVAL;
-	if (same_page && bio_flagged(bio, BIO_PAGE_PINNED))
-		unpin_user_folio(folio, 1);
-	return 0;
-}
-
 static unsigned int get_contig_folio_len(unsigned int *num_pages,
 					 struct page **pages, unsigned int i,
 					 struct folio *folio, size_t left,
@@ -1365,14 +1309,7 @@ static int __bio_iov_iter_get_pages(struct bio *bio, struct iov_iter *iter)
 			len = get_contig_folio_len(&num_pages, pages, i,
 						   folio, left, offset);
 
-		if (bio_op(bio) == REQ_OP_ZONE_APPEND) {
-			ret = bio_iov_add_zone_append_folio(bio, folio, len,
-					folio_offset);
-			if (ret)
-				break;
-		} else
-			bio_iov_add_folio(bio, folio, len, folio_offset);
-
+		bio_iov_add_folio(bio, folio, len, folio_offset);
 		offset = 0;
 	}
 
@@ -1728,16 +1665,22 @@ struct bio *bio_split(struct bio *bio, int sectors,
 {
 	struct bio *split;
 
-	BUG_ON(sectors <= 0);
-	BUG_ON(sectors >= bio_sectors(bio));
+	if (WARN_ON_ONCE(sectors <= 0))
+		return ERR_PTR(-EINVAL);
+	if (WARN_ON_ONCE(sectors >= bio_sectors(bio)))
+		return ERR_PTR(-EINVAL);
 
 	/* Zone append commands cannot be split */
 	if (WARN_ON_ONCE(bio_op(bio) == REQ_OP_ZONE_APPEND))
-		return NULL;
+		return ERR_PTR(-EINVAL);
+
+	/* atomic writes cannot be split */
+	if (bio->bi_opf & REQ_ATOMIC)
+		return ERR_PTR(-EINVAL);
 
 	split = bio_alloc_clone(bio->bi_bdev, bio, gfp, bs);
 	if (!split)
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 
 	split->bi_iter.bi_size = sectors << 9;